Digital Acoustics, LLC
Products
Products Overview
Intercoms
Software
OEM/Custom

System Designs

Learn about IP 
Documentation
Software Requests
Developers Tools
Q² - Quick  Quote

 

 

IP Paging over Ethernet  

     ...  Modular, Easy

Digital Acoustics announces IP7 Series, next-generation voice quality audio over wired, wireless and fiber in LAN/WAN networks

IP7 Series IP Public Address and Paging
... 100% Network/ IP based

Central software  manages system with digital voice quality

Zones extend over networks, span the Internet

Supports 1000's of stations without  head-end hardware

Highly configurable zone template mapping

Powerful integrated amplifier provides loud, crisp quality

Interface to analog overhead loudspeakers

Fast to deploy, easy to maintain

Audio monitoring and intercom capability at any end-point

Multicast Protocol enables seamless, clear, low bandwidth audio distribution

Connect VoIP Telephony Systems using TalkMaster™ SIP Media Gateway (SIP 2.0)

Patent pending Digital Acoustics® technology

t

Digital Acoustics offers an wide choice of speakers for the most demanding IP speaker paging requirements. Every acoustic environment is unique and using the right speakers is important in providing intelligible public address solutions. Digital Acoustics' IP speaker paging systems include:

  • 8" Ceiling Mounts - Round and Square IP Paging Speakers
  • Dual speaker hallway coverage version - 
  • Surface Mounted Enclosures - Square and Sloped
  • Internal Horns
  • External Paging Horns
  • Corrections Grade Solutions (Vandal Proof)
  • Weather Proof & Flame-retardant

Hallway Coverage with integrated amplifier

Ceiling and Wall Mounts with/without integrated IP amplifiers

8 and 20 watt
IP
Amplifiers 

click here for a listing of all IP speaker models

For applications that incorporate 25/70v or 8 ohm speaker systems modular IP7- SS8/SS20 Audio Amplifiers are a perfect solution. The IP7 series can drive 8-Ohm speakers, or multiple speakers in an array. . With a maximum output of 20 watts the SS20 (8 Ohms) is capable of driving paging horns with sound pressure levels in excess of 120 db SPL. For low output applications (<8 watts) the SS8 and SE8 can use Power of Ethernet (POE).  

For specific applications that require unique coverage inside a building solutions Digital Acoustics offers the SPKR-11-VC-P Bi-directional Speaker. The design incorporates a completely self contained IP Amplifier and dual speaker paging system. The surface mounted enclosure projects sound side-to-side for maximum efficiency and coverage length. It only requires an Ethernet connection with PoE, no other wiring is required. It is intended for indoor wall or ceiling mount for corridor paging of voice, tones and music.
 
Bi-Directional Speaker 11-BD

  • One Bi-directional speaker can replace up to 10 ceiling mount speakers

  • Reduces installation labor up to 80%

  • Ideal for hallways with hard surface ceilings to limit buried conduit runs

  • High intelligibility dual 4 inch speaker system

  • Built in IP Amplifier simplifies wiring to just 1 Poe Ethernet connection per device

Audio Distribution  Systems ... the IP Paging advantage

PA/IP (PA over IP), VoIP and SIP enabled paging provides unique advantages over analog paging systems

  • Proven cost saving over new single function wiring in deployment into existing buildings.
  • Spans multiple facilities inter-city, regionally and globally, without head-end hardware.
  • Scalable network topology facilitates expansion possibilities
  • Incorporates system wide capability to add intercom, 2 way-audio monitoring (reentrant capability) and remote monitoring functions.
  • Perfect for Retailers, Government  and School systems with complex inter-building distribution need. Multicast Protocol enables seamless, clear, low bandwidth audio distribution
  • Easily integrate into emergency systems.
  • Provides Ethernet network based redundancy for emergency broadcasts, and employee evacuation systems.
  • Design to integrate to SIP and VoIP enabled systems via TalkMaster(tm) software.

Emergency Preparedness / IP, VoIP and SIP Paging Systems

  • Provides supplemental reach to overhead IP paging, parking, inter-building and even individual desktop notification. 
  • Network based system provides integration path to meet needs and requirements for notifications to individuals with disabilities.
  • Cost effective means for compliance to Federal Emergency Decision and Notification Protocol OPM/GSA/NIH and other interagency requirements.
  • Call us to discuss  NFPA NFPA 71-2012 and our Ethernet VoIP Paging solutions

  • Protocols  TCP/IP, UDP, IP, ARP, ICMP, IGMP, MULTICAST

  • Packets  IP, VOIP (Voice over Internet Protocol), SIP (Session Initiated Protocol) 

  • Addressing Static or DHCP dynamically assigned IP over Ethernet
  • Audio Voice-band VoIP PCM, G.711, selectable bandwidths
  • Power 8 Watt SE8/SS8, 20 Watt amplifier SS20, options for 25/70v transformers
  • SE8 options  Door relays, Sensors, Integrated 2 port network switches
  • LAN  10/100  Base-T, Ethernet RJ45 for CAT5/CAT6. Supports wireless & fiber.

 

View all compatible models and support products   details


(Click image  to open interactive block diagram

IP Paging 

Sample 
Connection Block

(Click image on right to open
interactive block diagram)

details

(Click image  to open interactive block diagram

Wide Area Paging

Sample 
Connection Block

(Click image on right to open
interactive block diagram)

details


VoIP Paging Software     details

Paging Audio Clip    details.

Live Chat  with our online consultant   

 

 
back to top     
PRIVACY STATEMENT SITE MAP TERMS OF USE

Technology we can live with...